Product reviews for Louqe Ghost S1 Filter Kit

Top filter doesn't fit, didn't account for the pull tag on the cover and doesn't fit even with it off due to the Bezels off the filter being too thick to fit on the case.

Bottom is similar to top. You can't have the bottom ssd caddy attached with the filter, but even with it off the bezels off the filter are too thick and don't allow the bottom panel to be screwed on. The filter won't work on the outside of the case either as the feet of the case don't allow it.

The side filters are actually a pretty good fit. Due to the thickness of the filter bezel you will lose about 1-2mm of cpu clearance, my Noctua L12 still fits but it is literally touching the filter. You also lose 158 vent holes with the filter on due to the filters magnet covering up 1 row of vent holes on every side.

2 stars for this kit since only the side filters even work.

Easy to install, works as excpected, and doesnt ruin the design of the S1.

Only bad thing i noticed is my overall temps being overall worse with them on. It's as if it sucks in hot air when the dust filter is on.
CPU temps idle with dust filter on was around 53-60.
CPU temps idle without dust filter is consistently 43-50. As if it added 10 degrees overall.

I will most likely be leaving my dust filter off to not choke my computer sadly.